Materials to Build a Racetrack Octagon Poker Table
Suggested Tools
Before you can start building anything you have to make sure you have the proper tools. This is no different when building an octagon racetrack poker table. The list of suggested tools is as follows:
- Circular Saw
- Jig Saw or Small Hand Saw
- Staple Gun
- Drill
- Hole Saw (To fit the cup holders you choose)
- Staple Gun
- Painting / Staining Supplies
- Tape Measure
- Pencil
- Straight Edge
Required Materials
The materials to build an octagon racetrack poker table are basically the same as if you were building an 8 foot table but in half. All Fabric, Foam, Vinyl, and Cup Holders are available in the shop. You can also buy everything you need in a Poker Table Kit. A complete list of materials is as follows:
- 4′ x 8′ x 3/4″ Finish Grade Plywood
- 4 1/2′ Vinyl to Upholster the Octagon Rail
- 4 1/2′ Suited Speed Cloth to Upholster the Surface of the Table
- 4 1/2′ of 1″ Foam to Pad the Octagon Rail
- 4′ of 1/4″ Foam to Pad the Playing Surface
- 8 Cup Holders
- Stain and Polyurithane
- Box of 1 1/4″ Wood Screws
- 3M Spray Adhesive
- 200-300 Staples
After your materials arrive, its time to start in with the build. Please move on to Step Two – Wood Work.