Tools and Materials to Build a Racetrack Table
Tools
Your tool list to build a racetrack poker table is farily similar to the tool list required to build any of the tables on the site with a few additions. To make a racetrack poker table you will need:
- Tape Measure
- Pencil
- String or Wire
- Circular Saw
- Jig Saw
- Drill
- Hole Saw
- Sand Paper
- Paint Brush
- Staple Gun
Materials
The racetrack poker table materials list is below. Most of it can be purchased in our Poker Table Materials section of the site. You can even get a full poker table kit that includes everything but the wood and hardware to build your table. Required supplies include:
- (2)8’x4′ 3/4″ Plywood, One Sheet Must Be Finish Grade
- (8ft)Poker Table Playing Surface Fabric
- (9ft)Vinyl to Upholster the Rail
- (108″x54″x1/4″)Playing Surface Padding
- (108″x54″x1″)Rail Padding
- (8-10)Cup Holders (Optional)
- Stain
- Polyurithane or Polycrilic
- (1) Can of Spray Adhesive
- (50)1 1/4″ Wood Screws
- 300 Staples, You may use more than this even.
- Legs or Base (Optional)
With all of your materials and tools in hand, you are ready to take a look at the racetrack poker table plans in Step Two – Cutting the Wood.